Using PEAP-MSCHAP V2 Security

To use PEAP-MSCHAP V2 security In the Atheros Client Utility, access the Security tab in the Profile Management window.

1. On the Security tab, choose the WPA radio button. 
   OR: On the Security tab, choose the 802.1x radio button. 
2. Choose PEAP (EAP-MSCHAP V2) from the drop-down menu.

To use PEAP (EAP-MSCHAP V2) security, the server must have WPA-PEAP certificates, and the server properties must already be set. Check with the IT manager.

1. Click the Configure button.
2. Select the appropriate certificate from the drop-down list.
3. Specify a user name for inner PEAP tunnel authentication:

• Check Use Windows User Name to use the Windows user name as the PEAP user name.
• OR: Enter a PEAP user name in the User Name field to use a separate user name and start the PEAP authentication process.

4. Click Advanced and:

• Leave the server name field blank for the client to accept a certificate from any server with a certificate signed by the authority listed in the Network Certificate Authority drop-down list. (recommended)
• Enter the domain name of the server from which the client will accept a certificate. 
• The login name used for PEAP tunnel authentication, fills in automatically as PEAP-xxxxxxxxxxxx, where xxxxxxxxxxxx is the computer's MAC address.  Change the login name if needed.

5. Click OK.
6. Enable the profile.